A Soluble Gelatin Foam Sampler for Air-Borne Microorganisms at Surface Levels

Thermal precipitation for sampling air-borne microorganisms.

Batch foam separation of a soluble protein.

Removal of protein dissolved in water by batch foam separation was conducted with using ovalbumin (OA) as a model protein in the light of wastewater treatment reducing organic loading. The removal efficiency had a maximum value near the i.e.p. of OA (pH 4.6); thus, most experiments were conducted at pH 4.6. Typical experimental conditions; superficial gas velocity, U(g): 1.97 x 10(-2)-5.37 x 10...

Evaluation of a passive air sampler for measuring indoor formaldehyde.

A passive air sampler, using 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole, was evaluated for the determination of formaldehyde in indoor environments. Chromatography paper cleaned using a 3% hydrogen peroxide solution was experimentally determined as being the optimum absorption filter for the collection of formaldehyde (0.05 microg cm(-2) formaldehyde). From a linear-regression analysis betwe...

Thermal Contact Resistance at a Metal Foam-solid Surface Interface

Accurate information on heat transfer and temperature distribution in metal foams is necessary for design and modeling of thermal-hydraulic systems incorporating metal foams. The analysis of this process requires determination of the effective thermal conductivity as well as the thermal contact resistance (TCR) associated with the interface between the metal foams and adjacent surfaces/layers. ...

Daytime Ozone Variation in Surface Air in a Subtropical Mangrove Estuary at Manakudy, South India

Surface ozone (SOZ) can be very harmful if it exceeds the threshold limit. It can accumulate over sea and can return back to the land along with the breeze. Rural and vegetation rich areas often record elevated levels of surface ozone because of the variations in Volatile Organic Compound (VOC) levels, wind velocity and direction. Similarly methane is also an important greenhouse gas and plays ...