A study on application of sacrificial anode Al-Zn alloy to aluminum heat exchangers
نویسندگان
چکیده
منابع مشابه
Fabrication of Metallic Heat Exchangers Using Sacrificial Polymer Mandrils
This paper demonstrates the use of poly(dimethylsiloxane) (PDMS), polyurethane (PU), epoxy, and poly(methyl methacrylate) (PMMA) as mandrils to fabricate metallic heat exchangers having 300–700 m internal channels. The mandrils were prepared using two soft lithographic techniques-replica molding, and microembossing. To fabricate the heat exchangers, the polymeric mandrils were coated with a thi...
متن کاملStudy on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy
Based on the idea of alloying welding seams, a series of Zn-xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded join...
متن کاملInfluence of Casting Temperature on Electrochemical Behavior of Al-Zn-In Sacrificial Anodes
Aluminum anodes have been widely used in the cathodic protection of marine structures. However there are conditions in which these anodes become passivated or face some localized or unwanted corrosion, which influences their efficiency. Addition of alloying elements such as Zn and In not only have improved the efficiency of the anodes but also the effect of casting parameters such as ultra ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1979
ISSN: 0451-5994
DOI: 10.2464/jilm.29.410