A Study on Fracture Toughness Testing Method using Pre-compression Crack

Fracture Toughness of Ceramics by the Vickers Indentation Crack Length Method: a Critical Review

Fracture toughness is an important property that characterizes a material’s brittleness or resistance to fracture. Although some fracture toughness test methods have been refined and even standardized, many researchers have continued to use the Vickers indentation crack length method as an expedient. In this paper, Vickers indentation fracture resistance data for Standard Reference Material SRM...

Fracture toughness and fatigue crack growth characteristics of nanotwinned copper

Recent studies have shown that nanotwinned copper (NT Cu) exhibits a combination of high strength and moderate ductility. However, most engineering and structural applications would also require materials to have superior fracture toughness and prolonged subcritical fatigue crack growth life. The current study investigates the effect of twin density on the crack initiation toughness and stable ...

Buoyancy-driven crack propagation: the limit of large fracture toughness

Fracture Toughness of Wood and Wood Composites during Crack Propagation

The mode I fracture toughness as a function of crack length of medium density fiberboard (MDF), particle board (PB), and Douglas-fir (DF) were all measured using a new energy-based method. PB and MDF are examples of composites that develop fiber bridging during crack propagation, which causes their toughness to increase with crack length. Longitudinal cracks in DF also displayed fiber bridging ...

Fracture Toughness Study on Bulk Metallic Glasses and Novel Joining Method Using Bulk Metallic Glass Solder

The fracture toughness of three new compositional variants of the Zr-Ti-Be-LTM (Late Transition Metal) family of bulk metallic glasses (BMG’s) are studied in the as-cast and annealed condition. Quaternary Zr-Ti-Cu-Be alloys consistently had linear elastic fracture toughness values greater than 80 MPa·m, while Vitreloy 1, a Zr-Ti-Cu-Ni-Be alloy, had an average fracture toughness of 48.5 MPa·m wi...