A Study on Melt Flow Index on Copper-ABS for Fused Deposition Modeling (FDM) Feedstock
نویسندگان
چکیده
منابع مشابه
Study on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality
3D printing known as additive manufacturing (AM) has been applied for applications in different fields such as aerospace, automotive, biomedical, and energy industries. It is the fact that 3D printing has gained a very wide acceptance over the last decade. However, several significant hurdles prevent its wider adoption. One of the most important barriers is the quality of the printed parts. Cur...
متن کاملFinishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling With Focus on Dimensional Accuracy
Fused Deposition Modeling (FDM) parts are prone to process-related rough and wavy surfaces with stair-stepping effects whenever the parts produced have sloped or rounded geometries. These stair-stepping effects can be reduced by using a smaller slice height, but complete elimination is not possible. In this paper, FDM parts manufactured with the material ABS-M30 are finished using mass finishin...
متن کاملa study on thermodynamic models for simulation of 1,3 butadiene purification columns
attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...
effect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mechanics and Materials
سال: 2015
ISSN: 1662-7482
DOI: 10.4028/www.scientific.net/amm.773-774.8