A tension stress loading unit designed for characterizing indentation response of single crystal silicon under tension stress
نویسندگان
چکیده
منابع مشابه
Buckling of Single-Crystal Silicon Nanolines under Indentation
Atomic force microscope-(AFM-) based indentation tests were performed to examine mechanical properties of parallel singlecrystal silicon nanolines (SiNLs) of sub-100-nm line width, fabricated by a process combining electron-beam lithography and anisotropic wet etching. The SiNLs have straight and nearly atomically flat sidewalls, and the cross-section is almost perfectly rectangular with unifor...
متن کاملComposite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملA framework for stress computation in single-walled carbon nanotubes under uniaxial tension
A procedure is proposed for computing the stresses in an armchair single-walled carbon nanotube (SWCNT) under uniaxial tension. Computation is based on molecular dynamics simulations and the virial stress theorem. The proposed approach is compared with other methods used in the literature for calculating the stresses in CNTs. The loading is applied under two different boundary conditions and di...
متن کاملCumulative Fatigue Damage Under stepwise Tension-Compression Loading
Rock structures are subjected to cyclic tension-compression loading due to a blasting, earthquake, traffic and injection-production in underground storage case. Therefore study the fatigue behavior of rock samples under this type of loading is required. In this study, the accumulated fatigue damage for a Green Onyx rock sample which consisted of only one mineral composition with two-step high-l...
متن کاملEvaluation of stress distribution in bolted steel angles under tension
The stress distribution in the vicinity of connections in a bolted steel angle is non-uniform because of the coupled effects of connection eccentricity, shear lag and stress concentrations. Although, some researchers have attempted finite element analysis, stipulations in various codes and specifications regarding the design of angle tension members are primarily based on the experimental studi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2013
ISSN: 2158-3226
DOI: 10.1063/1.4823479