A Thermal Test System for Helmet Cooling Studies
نویسندگان
چکیده
منابع مشابه
Cooling of Motorcyclist Helmet with Thermoelectric Module
This paper deals with the development of cooling system for motorcycle helmet using thermoelectric technology. The system consists mainly of a heat sink and thermoelectric module. When electrical voltage is applied to the thermoelectric module, it will create a temperature difference across the thermoelectric module. This phenomenon is also known as Peltier effect, is being used to utilize elec...
متن کاملRapid and selective cerebral hypothermia achieved using a cooling helmet.
OBJECT Hypothermia is by far the most potent neuroprotectant. Nevertheless, timely and safe delivery of hypothermia remains a clinical challenge. To maximize neuroprotection yet minimize systemic complications, ultra-early delivery of selective cerebral hypothermia by Emergency Medical Service (EMS) personnel in the field would be advantageous. The authors (W.E. and H.W.) have developed a cooli...
متن کاملnew method for designing an optimum distributed cooling system for effluent thermal treatment
temperature restrictions on aqueous effluents dictate that streams with a temperature higher than the permitted level needed to pass through cooling systems to reduce the effluent temperature before discharge. in this study, by considering the grouping design rules based on pinch technology, an optimum design for a distributed effluent cooling system, has been developed. a counter-flow wet cool...
متن کاملThermal Analysis of a Solar Powered Absorption Cooling System with Fully Mixed Thermal Storage at Startup
A simple effect one stage ammonia-water absorption cooling system fueled by solar energy is analyzed. The considered system is composed by a parabolic trough collector concentrating solar energy into a tubular receiver for heating water. This is stored in a fully mixed thermal storage tank and used in the vapor generator of the absorption cooling system. Time dependent cooling load is considere...
متن کاملA Cooling System with a Fan for Thermal Management of High-Power LEDs
To improve the heat dissipation of high-power light-emitting diodes (LEDs), a cooling system with a fan is proposed. In the experiment, the LEDs array of 18 W composed of 6 LEDs of 3 W is used and the room temperature is 26oC. Results show that the temperature of the substrate of LEDs reaches 62oC without the fan, however, it reaches only 32oC when the best cooling condition appears. The temper...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings
سال: 2018
ISSN: 2504-3900
DOI: 10.3390/proceedings2060272