منابع مشابه
A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...
متن کاملA multiscale cohesive zone model and simulations of fractures
In this work, a novel multiscale cohesive zone model is proposed, in which the bulk material is modeled as a local quasi-continuum medium that obeys the Cauchy–Born rule while the cohesive force and displacement relations inside the cohesive zone are governed by a coarse grained depletion potential. The interface depletion potential is constructed based on the Derjaguin approximation of nonloca...
متن کاملEfficient thermo-mechanical model for solidification processes
A new, computationally efficient algorithm has been implemented to solve for thermal stresses, strains, and displacements in realistic solidification processes which involve highly nonlinear constitutive relations. A general form of the transient heat equation including latent-heat from phase transformations such as solidification and other temperature-dependent properties is solved numerically...
متن کاملDebonding of confined elastomeric layer using cohesive zone model
model (CZM). Using stability analysis of linear equations governing plane strain quasi-static deformations of an elastomer, we find (i) a non-dimensional number relating the elastomer layer thickness, h, the long term Young's modulus, E1, of the interlayer material, the peak traction, Tc, in the CZM bilinear tractionseparation (TS) relation, and the fracture energy, Gc, of the interface between...
متن کاملThermo-mechanical analysis of magnesium alloy cylinder heads using a two-layer viscoplasticity model
Loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. The aim of this study is to compare the distribution of temperature and stress in the aluminum and magnesium cylinder heads under thermo-mechanical loads. The three-dimensional model of the cylinder heads was simulated in abaqus software and a two-layer viscoplasticity mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computational Mechanics
سال: 2010
ISSN: 0178-7675,1432-0924
DOI: 10.1007/s00466-010-0507-z