A three-parameter elastic foundation model for interface stresses in curved beams externally strengthened by a thin FRP plate

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Debonding-Related Strain Limits for Externally Bonded FRP Sheets in Flexurally Strengthened Reinforced Concrete Beams

Debonding problems of externally bonded fiber reinforced polymer (FRP) sheets in flexurally FRP-strengthened reinforced concrete (RC) beams have been a concern and a research challenge since their application of this strengthening technique. Intermediate crack induced debonding is the most common failure mode which is that the debonding initiates at the critical flexural-shear or flexural crack...

متن کامل

Fatigue-loading effect on RC beams strengthened with externally bonded FRP

Externally bonded carbon-epoxy fiber-reinforced polymers (CFRPs) have been widely used to restore or increase the capacities of reinforced concrete beams (Meier et al., 1992; Neale and Labossière, 1997; Varastehpour and Hamelin, 1997). A typical reinforced concrete bridge deck may experience up to 7x10 stress cycles during the course of a 120year life span (Barnes and Mays, 1999), while an over...

متن کامل

Numerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp

As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...

متن کامل

Debonding Failures of Rc Beams Strengthened with Externally Bonded Frp Reinforcement: Behaviour and Modelling

Both the flexural and shear strengths of reinforced concrete (RC) beams can be substantially enhanced using externally bonded fibre reinforced polymer (FRP) composites. Failures of such FRP-strengthened RC beams often occur by debonding of the FRP plate from the RC beam in a number of forms. Despite numerous theoretical and experimental studies on debonding failures of FRP-strengthened RC beams...

متن کامل

Structural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading

This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Solids and Structures

سال: 2010

ISSN: 0020-7683

DOI: 10.1016/j.ijsolstr.2009.12.017