A Transient Electromagnetic Flowmeter and Calibration Facility
نویسندگان
چکیده
منابع مشابه
A Transient Electromagnetic Flowmeter and Calibration Facility
Flowmeter and Calibration Facility P.J. Lefebvre Naval Underwater Systems Center, Newport, R.1. An electromagnetic flowmeter was developed to measure transient flows at a data rate of 60 Hz. The approach taken was to develop suitable electronics to replace the electronics ofa commercially available electromagnetic flowmeter normally used W. W. Durgin for steady-state operation. Use of the comme...
متن کاملAn electromagnetic catheter-flowmeter.
An electromagnetic flowmeter incorporated into a catheter is described. The catheter is introduced into the aorta via the femoral artery. The flow sensor is located some distance below the catheter tip and is sensitive to flow at right angles to the catheter. A crater-like elevation at one end of the transducer lumen permits funnel-like connection of the transducer to the ostium of an aortic br...
متن کاملThe Characterization of a Piston Displacement-Type Flowmeter Calibration Facility and the Calibration and Use of Pulsed Output Type Flowmeters
Critical measurement performance of fluid flowmeters requires proper and quantified verification data. These data should be generated using calibration and traceability techniques established for these verification purposes. In these calibration techniques, the calibration facility should be well-characterized and its components and performance properly traced to pertinent higher standards. The...
متن کاملThe Application of Measurement Assurance Techniques in a High Capacity Automated Flowmeter Calibration Facility
The paper describes a study that forms part of a measurement assurance program (MAP) in place at Ford Motor Company. The purpose of a MAP is to assure on an ongoing basis that the total uncertainty associated with a measurement process meets the requirements of the customer. The gage repeatability and reproducibility study and statistical control chart are two traditional parts of the Ford MAP....
متن کاملThe Electromagnetic Flowmeter and Its Use in the Operating Room
History of Blood Flow Measurement The first attempt to measure blood flow was by Chauveau, et al. in 1869. This was a mechanical device in which the moving blood was made to strike a mechanical linkage which moved in relation to the velocity of the blood. A variety of other mechanical devices were designed to measure blood flow in the late 1800's including the Stromuhr of Carl Ludwig and the di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fluids Engineering
سال: 1990
ISSN: 0098-2202,1528-901X
DOI: 10.1115/1.2909360