A Virtual Direct Current Control Method of LCL-DAB DC-DC Converters for Fast Transient Response and No Backflow Power

نویسندگان

چکیده

The LCL-type dual active bridge (LCL-DAB) DC-DC converter is a promising part for DC micro-grids due to its high voltage gain and low current, but the issues of backflow power elimination transient response optimization deserve attention in operation. In this article, virtual direct current control (VDCC) method LCL-DAB fast no proposed, which can eliminate improve against input load disturbances. With dual-phase-shift (DPS) modulation scheme, voltage-current characteristics are first analyzed using phasor method. small-signal mathematic model then established. characteristic derived so design regions be graphed. On basis, an appropriate outer phase shift ratio estimated ensure wide range Moreover, generated compensate loop, thus disturbances improved under power. Simulation prototype experimental results presented verify feasibility proposed VDCC

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Uniform Nonlinear Control Method for DC-DC Converters with Fast Transient Response

of this periodical may be reproduced or transmitted in any form or by any means, or stored in any retrieval system of any nature without the prior written permission of the HKIE. The HKIE has endeavored to ensure the published information is correct and lawful at the time of printing, but the HKIE does not make any warranties or representations, express or implied, with respect to any informati...

متن کامل

Backflow Power Optimization Control for Dual Active Bridge DC-DC Converters

Abstract: This paper proposes optimized control methods for global minimum backflow power based on a triple-phase-shift (TPS) control strategy. Three global optimized methods are derived to minimize the backflow power on the primary side, on the secondary side and on both sides, respectively. Backflow power transmission is just a portion of non-active power transmission in a dual active bridge ...

متن کامل

DC-DC Power Converters

Dc-dc power converters are employed in a variety of applications, including power supplies for personal computers, office equipment, spacecraft power systems, laptop computers, and telecommunications equipment, as well as dc motor drives. The input to a dc-dc converter is an unregulated dc voltage Vg. The converter produces a regulated output voltage V, having a magnitude (and possibly polarity...

متن کامل

Current-Sensing Techniques for DC-DC Converters

Current sensing is one of the most important functions on a smart power chip. Conventional current-sensing methods insert a resistor in the path of the current to be sensed. This method incurs significant power losses, especially when the current to be sensed is high. Lossless current-sensing methods address this issue by sensing the current without dissipating the power that passive resistors ...

متن کامل

Control of DC-DC Converters

A constant voltage regulator, to supply constant power loads, is realized using a Switched-capacitor converter. Exhaustive studies have been carried out to find the suitability of available control schemes and finally one control scheme investigated with (i) operation of the converter at different crossover frequencies (ii) operation of the converter at different phase Margins. Various operatin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied sciences

سال: 2023

ISSN: ['2076-3417']

DOI: https://doi.org/10.3390/app13042075