منابع مشابه
Postcritical Imperfection-sensitive Buckling and Optimal Bracing of Large Regular Frames
ABS!RA~T: Periodic i.nterior buckling of regular multistory and multibay rectangular elastic frames with elastic bracmg IS analyzed. It IS shown that there exists a certain critical bracing stiffness for which the critical loads f~r the nonsw~y (symmetric) ~d sway (antisymme~c) buckling modes coincide. Simple formulae for the critical stIffness .are .glven .. For the. c~.tica~ and soft~r bracI~...
متن کاملModeling Elastic and Inelastic, Critical- and Post-buckling Behavior of Bracing Members
An efficient beam element, the modified elastofiber (MEF) element, has been developed to capture the overall features of the elastic and inelastic response of slender columns and braces under axial cyclic loading without unduly heavy discretization. It consists of three fiber segments, two at the member ends and one at mid-span, with two elastic segments sandwiched in between. The segments are ...
متن کاملAnalytical approach of buckling strength of yielding damped braced core (YDBC)
Abstract: Previous research on bracing members show that the ductility of bracing members is compromised due to the buckling phenomena. Therefore, many researchers have tried to use special considerations to increase the fracture life of bracing members. Some of these recommendations such as increasing the slenderness ratio, using lower width to thickness ratio, increasing the out-of-p...
متن کاملSeismic Retrofitting of Steel Frames with Buckling Restrained and Ordinary Concentrically Bracing Systems with Various Strain Hardening and Slenderness Ratios
The present study assesses the seismic performance of steel moment resisting frames (SMFs) retrofitted with different bracing systems. Two structural configurations were utilized: ordinary concentrically braces (OCBFs), buckling-restrained braces (BRBFs). A 7-story and 18-story steel perimeter SMFs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...
متن کاملAn Experimental Study on Non-Compression X-Bracing Systems Using Carbon Fiber Composite Cable for Seismic Strengthening of RC Buildings
Cross-bracing (X-bracing) is one of the most popular methods of seismic retrofitting, and has been shown to significantly increase the structural stiffness and strength of buildings. Conventional steel X-bracing methods typically exhibit brittle failure at the connection between the brace and the building, or buckling failure of the braces. This study investigated the structural properties of a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Science, Technology and Society
سال: 2014
ISSN: 2330-7412
DOI: 10.11648/j.ijsts.20140204.12