Abrasion Properties of Steel Fiber Reinforced Silica Fume Concrete According to Los Angeles and Water Abrasion Tests

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

freeze and thaw, and abrasion resistance of steel fiber reinforced concrete (sfrc)

an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...

متن کامل

Introduction and Application of Rotational Abrasion Device to Determine Concrete Pavement Abrasion

Abrasion susceptibility of highway pavements has a great impact on the skid resistance, and consequently accident rate. A rotational abrasion device is introduced, providing the advantage of field simulation of wheel passage, in comparison with existing standard methods. The device was used to measure abrasion susceptibility of concrete pavements with different textures. The obtained results we...

متن کامل

Flexural Fatigue Strength of Steel Fibre Reinforced Concrete Containing Blends of Limestone Powder and Silica Fume

Based upon the statistical distribution of flexural fatigue life data and flexural fatigue strength of the steel fibre reinforced concrete (SFRC) containing blends of limestone powder (LP) and silica fume (SF), the influence of these inserts on the flexural fatigue performance of concretes is probed. Concrete mixes were proportioned to replace 30% cement with these mineral inserts in different ...

متن کامل

Some Studies on Steel Fiber Reinforced Concrete

Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...

متن کامل

Influence of Nano-Silica and Silica Fume in the Steel Corrosion Embedded in Concrete

Corrosion of steel is one of the most important potential dangers and threats in concrete structures. Corrosion of steel embedded in reinforced concrete plays a key role in reducing the strength and durability of reinforced concrete. Several studies have proposed that alternative approaches to enhancing the performance of reinforced concrete and its resistance to corrosion. In this study, the r...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials Science

سال: 2014

ISSN: 2029-7289,1392-1320

DOI: 10.5755/j01.ms.20.4.6460