Absorbing TiOxthin film enabling laser welding of polyurethane membranes and polyamide fibers
نویسندگان
چکیده
منابع مشابه
Absorbing TiOx thin film enabling laser welding of polyurethane membranes and polyamide fibers
We report on the optical properties of thin titanium suboxide (TiO x ) films for applications in laser transmission welding of polymers. Non-absorbing fibers were coated with TiO x coatings by reactive magnetron sputtering. Plasma process parameters influencing the chemical composition and morphology of the deposited thin films were investigated in order to optimize their absorption properties....
متن کاملEffect of mobile cation on zeolite-polyamide thin film nanocomposite membranes
Articles in this section are based on presentations that were selected by MRS Meeting Symposium Organizers as outstanding papers. Upon selection, authors are invited to submit their research results to Journal of Materials Research. These papers are subject to the same peer review and editorial standards as all other JMR papers. This is another way by which the Materials Research Society recogn...
متن کاملA Novel Approach Toward Fabrication of High Performance Thin Film Composite Polyamide Membranes.
A practical method is reported to enhance water permeability of thin film composite (TFC) polyamide (PA) membranes by decreasing the thickness of the selective PA layer. The composite membranes were prepared by interfacial polymerization (IP) reaction between meta-phenylene diamine (MPD)-aqueous and trimesoyl chloride (TMC)-organic solvents at the surface of polyethersulfone (PES) microporous s...
متن کاملFilm-free laser forward printing of transparent and weakly absorbing liquids.
A laser-based technique for printing transparent and weakly absorbing liquids is developed. Its principle of operation relies in the tight focusing of short laser pulses inside the liquid and close to its free surface, in such a way that the laser radiation is absorbed in a tiny volume around the beam waist, with practically no absorption in any other location along the beam path. If the absorb...
متن کاملLASER WELDING - Literature Review
Lasers are now being used in the automotive industry to produce seam or stitch welds, as alternatives to conventional resistance spot welding, which are used extensively for attaching auto-body panels to subassemblies. The advantages of laser welding over resistance spot welding result from the smallness of the laser spot size, the large penetration depth of the weld into the material and the r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Technology of Advanced Materials
سال: 2015
ISSN: 1468-6996,1878-5514
DOI: 10.1088/1468-6996/16/5/055002