Acceleration Signal Characteristics for Loose Part Impact
نویسندگان
چکیده
منابع مشابه
Combustion characteristics of cellulosic loose fibres
The aim of this paper is to study the combustion characteristics of loose fibrous cellulosic compounds through cone calorimeter measurements. The challenge in studying loose fibrous materials by cone calorimeter in a reproducible manner is met by optimizing various process parameters such as sample weight, heat flux and grid type. The method is validated using cotton fibres and fabrics with a r...
متن کاملApplication of Signal Processing Tools for Fault Diagnosis in Induction Motors-A Review-Part II
The use of efficient signal processing tools (SPTs) to extract proper indices for the fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The 2nd part of this two-part paper is, in turn, divided into two parts. Part two covers the signal processing techniques which can be applied to non-stationary conditions. In this paper, all utilized SPTs for n...
متن کاملA Review of Application of Signal Processing Techniques for Fault Diagnosis of Induction Motors – Part I
Abstract - Use of efficient signal processing tools (SPTs) to extract proper indices for fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The Part1 of the two parts paper focuses on Fourier-based techniques including fast Fourier transform and short time Fourier transform. In this paper, all utilized SPTs which have been employed for fault fete...
متن کاملImpact failure characteristics in sandwich structures. Part II: Effects of impact speed and interfacial strength
In this paper, we describe the second part of an experimental investigation concentrating on the study of the effects of impact speed and interfacial bond strength on the dynamic failure of model sandwich structures. Results show that even small variations in impact speed and bond strength substantially influence the initiation behavior of delamination (location and nucleation time) and lead to...
متن کاملTesting the impact attenuation of loose-fill playground surfaces.
OBJECTIVES Our objective was to measure the impact attenuation performance of five types of loose-fill playground surfaces at a variety of drop heights, material depths, and conditions. METHODS In a laboratory setting, an instrumented head form was dropped on varying depths of loose-fill materials at one foot height increments until critical deceleration values were exceeded. The effects of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Science and Technology
سال: 1986
ISSN: 0022-3131,1881-1248
DOI: 10.1080/18811248.1986.9735085