Acoustic emission and stage of high-cycle fatigue
نویسندگان
چکیده
منابع مشابه
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملMonitoring of Metal Fatigue Damage Using Acoustic Emission and Thermography
Acoustic emission (AE) supplies information on the fracture behavior of different materials. In this study, AE activity was recorded in metal coupons with a V-shape notch, which were loaded in fatigue until final failure. AE parameters exhibit a sharp increase approximately 1000 cycles before final failure. The use of AE parameters is discussed both in terms of characterization of the damage me...
متن کاملAcoustic Emission of Fatigue-deformed Alumminum Alloys for Automotive Panels
Acoustic emission behavior during fatigue deformation and fracture was investigated in Al-Mg-Si alloys for automotive body panels. Generation of fatigue cracks was clearly identified by the burst of AE signals at the early stage of fatigue test. During the middle stage of fatigue, AE signals having low amplitude about 60dB corresponding to the propagation of striations appeared continuously. At...
متن کاملpage translation and stage translation of drama texts
نمایشنامه به پیروی از ماهیت دوگانه اش، کارکردی دوگانه به خود می گیرد، بدین معنا که در هر دو نظام ادبی و تئاتری می تواند کارکردی مختص به خود یابد. هدف از انجام این پژوهش یافتن تفاوت ها میان ترجمه صفحه و ترجمه صحنه است.. پرسش مطرح شده عبارتست از: بر اساس مدل ارائه شده توسط لدوسر (1995)، تفاوت های ترجمه صفحه و ترجمه صحنه در چیست؟ یافته های این پژوهش حاکی از آن است که ترجمه صفحه به نمایشنامه ا...
Effect of Low Cycle Fatigue Predamage on Very High Cycle Fatigue Behavior of TC21 Titanium Alloy
The effect of low cycle fatigue (LCF) predamage on the subsequent very high cycle fatigue (VHCF) behavior is investigated in TC21 titanium alloy. LCF predamage is applied under 1.8% strain amplitude up to various fractions of the expected life and subsequent VHCF properties are determined using ultrasonic fatigue tests. Results show that 5% of predamage insignificantly affects the VHCF limit du...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
سال: 2014
ISSN: 1211-8516,1211-8516
DOI: 10.11118/actaun200553020045