Acoustic Emission Peak under Cyclic Deformation
نویسندگان
چکیده
منابع مشابه
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملAcoustic Emission of Deformation Twinning in Magnesium
The Acoustic Emission of deformation twinning in Magnesium is investigated in this article. Single crystal testing with combined full field deformation measurements, as well as polycrystalline testing inside the scanning electron microscope with simultaneous monitoring of texture evolution and twin nucleation were compared to testing at the laboratory scale with respect to recordings of Acousti...
متن کاملAn acoustic emission study of plastic deformation in polycrystalline aluminium
Acoustic emission experiments were performed on polycrystalline and single crystal 99.990/0 aluminium while undergoing tensile deformation. It was found that acoustic emission counts as a function of grain size showed a maximum value at a particular grain size. Furthermore, the slip area associated with this particular grain size corresponded to the threshold level of detectability of single di...
متن کاملACOUSTIC EMISSION DURING DEFORMATION OF Al-Li ALLOYS
The relationship between tensile elongation and acoustic emission (AE) detected during compressive deformation of 81-Li and Al-Li-Zr alloys has been investigated for a range of microstructure. For comparison, AE measurements have been carried out for A1-Cu and commercial 7050 alloys. In the polycrystalline binary A1-Li alloys, the most pronounced AE was detected in the underaged condition durin...
متن کاملIrreversibility transition of colloidal polycrystals under cyclic deformation
Cyclically loaded disordered particle systems, such as granular packings and amorphous media, display a non-equilibrium phase transition towards irreversibility. Here, we investigate numerically the cyclic deformation of a colloidal polycrystal with impurities and reveal a transition to irreversible behavior driven by the displacement of dislocations. At the phase transition we observe enhanced...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1976
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.40.5_492