ACOUSTIC EMISSION UNDER TEMPERATURE TESTS OF MATERIALS
نویسندگان
چکیده
منابع مشابه
High-temperature acoustic emission tests using lithium niobate piezocomposite transducers
Acoustic emission (AE) analysis is used for testing materials in structural components and machinery. Acoustic emission frequently consists of ultrasound in the frequency range 100 kHz to 1 MHz, generated either from growing cracks or from mechanical failure in rotating machinery. In the case of crack growth, individual AE events correspond to the release of elastic energy as the crack grows st...
متن کاملAcoustic Emission in Materials Research – a Review
This paper reviews progress in methods of signal analysis used in acoustic emission (AE) as applied to materials research field. The achievement and inadequacy in understanding of AE from materials during the deformation, fracture and other processes are examined systematically. New goals for the future are also discussed in view of new analytical tools and vastly advanced instrumentation.
متن کاملHealth Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملAcoustic emission during fracture of ceramic superconducting materials
In the ceramic materials acoustic emission (AE) is associated with a rapid elastic energy release due to the formation and expansion of cracks, which causes generation and propagation of the elastic wave. AE pulses measurement allows monitoring of internal stresses changes and the development of macroand micro-cracks in ceramic materials, and that in turn allows us to evaluate the time to failu...
متن کاملStudy of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Aviation
سال: 2005
ISSN: 1648-7788,1822-4180
DOI: 10.3846/16487788.2005.9635914