Acoustic Enhancement of Polymer/ZnO Nanorod Photovoltaic Device Performance

Piezoelectric Enhancement of Hybrid Organic/Inorganic Photovoltaic Device

Solar cells are produced using solution processing that combine ZnO nanorods with the conjugated polymer poly(3-hexylthiophene) (P3HT). ZnO nanorods have an average length and diameter of 2.7 μm and 81 nm, and are well coated with P3HT. The solar cells have a power conversion efficiency of 1.24 %, which increases to 1.78 % when 10 kHz acoustic vibrations are applied to the device at 75 dB using...

Enhanced photovoltaic performance in nanoimprinted pentacene-PbS nanocrystal hybrid device

Pentacene and PbS nanocrystal bilayer photovoltaic devices are fabricated after the pentacene layer is subjected to nanoimprinting using a laser textured silicon stamp. Increased short circuit current densities are observed for the imprinted devices, which are attributed to increased charge mobility in the pentacene film caused by the decrease in the intermolecular distances during nanoimprinti...

Photovoltaic Cells Energy Performance Enhancement with Down- Converting Photoluminescence Phosphors

Phosphors, synthesized by the urea homo-precipitation method, were examined as UV-spectral down conversion materials for improving the light absorption and electrical characteristics of commercial single-junction silicon solar cells. The PV cells were coated with Erbium and Terbium doped Gadolinium Oxysulfide phosphors encapsulated in EVA binder using blade screen printing technique, and the op...

Charge Transport in Hybrid Nanorod-Polymer Composite Photovoltaic Cells

Simple Photovoltaic Device Based on Multiwall Carbon Nanotube/Silicon Heterojunction

Multiwall carbon nanotubes (MWCNTs) are grown via chemical vapour deposition method directly on a stainless steel substrate. Raman spectroscopy and transmission electron microscopy are the techniques chosen to characterize the structure of the synthesized carbon nanotubes: few structural defects are detected. After their removal from the stainless steel substrate, the as-grown MWCNTs are then a...