Acoustic insulation properties of lime mortars with natural lightweight aggregate
نویسندگان
چکیده
منابع مشابه
Properties of Green Lightweight Aggregate Concrete
With increasing concern over the excessive exploitation of natural aggregates, synthetic lightweight aggregate produced from environmental waste is a viable new source of structural aggregate material. The uses of structural grade lightweight concrete reduce considerably the self-load of a structure and permit larger precast units to be handled. In this paper, the mechanical properties of a str...
متن کاملPrediction of Lightweight Aggregate Concrete Compressive Strength
Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method. One of the main methods of non-destructive testing in the assessment of compressive strength...
متن کاملAn assessment of lime mortars for masonry repair
Most historic and traditional mortars were made with lime. Due to their nature and function lime mortars weather and need to be replaced. Ordinary portland cement mortars can often be incompatible with historic masonry causing structural and aesthetic damage. Petrographic analysis of original mortars from Clonmacnoise Monastery and Ardamullivan Castle evidenced that they were fabricated with fe...
متن کاملInvestigation of Acoustic Properties of Polymer Nanocomposites regarding Combined Sound Absorption and Insulation Characteristics
Introduction: Nowadays multiple techniques have been developed to noise control. One the most important way is the control based on sound absorption and insulation. The purpose of current study was to improve the acoustic properties of soft polyurethane foam regarding combined sound absorption and insulation characteristics. Materials and Methods: Polyacrylonitrile and polyvinylidine fluoride ...
متن کاملChanges in Properties of Cement and Lime Mortars When Incorporating Fibers from End-of-Life Tires
This paper studies the addition of fibers from end-of-life tires to commercial mortar mixtures. Two different types of mortar, one lime-plastic and other cement-fluid, are mixed with different percentage of fibers ranging from 0% to 1%. The changes in bulk density, consistency, compressive and flexural strength, dynamic Young modulus and water absorption are studied. According to the results, c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2019
ISSN: 2261-236X
DOI: 10.1051/matecconf/201928202075