Acoustic Process Control for Laser Material Processing
نویسندگان
چکیده
منابع مشابه
Adaptive Optics Control for Laser Material Processing
An adaptive optics system is used for correcting tip-tilt disturbances in an experimental laser material processing setup. The proposed tip-tilt controller is based on PI-controllers that are fed with disturbance estimates from a Kalmanfilter. In addition, delays due to wavefront computation in the wavefront sensor and from data transmission are taken into account in the loop-shaping design. La...
متن کاملTubular filamentation for laser material processing
An open challenge in the important field of femtosecond laser material processing is the controlled internal structuring of dielectric materials. Although the availability of high energy high repetition rate femtosecond lasers has led to many advances in this field, writing structures within transparent dielectrics at intensities exceeding 10(13) W/cm(2) has remained difficult as it is associat...
متن کاملNonminimum Phase Behavior of Laser Material Processing
Optical sensors are increasingly applied in laser material processing to monitor and control the lasermaterial interaction zone. Dynamic models, relating the sensor signals (e.g. as temperature or molten area) to the process inputs (e.g. laser power or beam velocity), provide the basis for the design and tuning of a feedback controller. These models can show nonminimum phase (NMP) behavior. Thi...
متن کاملLaser-powder-material interactions in the laser cladding process
In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the workpiece and given the amount of powder sticking to the molten pool. The powder reaching the workpiece is assumed to melt instantaneously at...
متن کاملApplication of μ-synthesis based H∞-control for adaptive optics in laser material processing
An adaptive optics system is used for the controlled attenuation of tip-tilt disturbances in an experimental laser material processing setup. It is shown that a H∞controller based on the μ-synthesis approach successfully accounts for the model uncertainties that, in the main, are unknown delays originating from the wavefront reconstruction and data transmission. The μ-synthesis problem is solve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Laser Technik Journal
سال: 2017
ISSN: 1613-7728
DOI: 10.1002/latj.201700029