Activated Carbon Production from Agricultural Biomass Using Response Surface Method (RSM) for Cd (II) Removal
نویسندگان
چکیده
منابع مشابه
The efficiency of modified powdered activated carbon for removal of ammonia nitrogen from aqueous solution: a process optimization using RSM (Response Surface Methodology), adsorption isotherm and kinetic study
The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...
متن کاملEfficiency of Powdery Activated carbon in Ammonia-Nitrogen Removal from Aqueous Environments (Response Surface Methodology)
Background & Aims of the Study: Nitrogenous compounds could directly create many problems for human's health and the environment. Thus, removal of nitrogenous compounds is necessary. Among the most important problems, decreasing dissolved oxygen, toxicity for aquatics, eutrophication, converting aerobic medium into anaerobic one and corrosion could be noted. The aim of this stu...
متن کاملCd (II) Removal from Aqueous Solutions by Adsorption on Henna and Henna with Chitosan Microparticles Using Response Surface Methodology
In this research, the capabilities of Henna and Henna with chitosan microparticles adsorbents were studied in order to remove the ion Cd (II). Response Surface Method (RSM) and Central Composite Design (CCD) were used to minimize the number of experiments (21 runs) for Henna and (26 runs) for the Henna with chitosan microparticles. The parameters were pH (2-9), initial solution concentratio...
متن کاملOptimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...
متن کاملRemoval of Lead (II) Ions from Aqueous Solutions onto Activated Carbon Derived from Waste Biomass
The removal of lead (II) ions from aqueous solutions was carried out using an activated carbon prepared from a waste biomass. The effects of various parameters such as pH, contact time, initial concentration of lead (II) ions, and temperature on the adsorption process were investigated. Energy Dispersive X-Ray Spectroscopy (EDS) analysis after adsorption reveals the accumulation of lead (II) io...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jurnal Teknologi
سال: 2014
ISSN: 2180-3722,0127-9696
DOI: 10.11113/jt.v69.3144