Active Damping of Dynamical Structures Using Piezo Self Sensing
نویسندگان
چکیده
منابع مشابه
Active Damping of a Piezoelectric Tube Scanner using Self-Sensing Piezo Actuation.
In most Atomic Force Microscopes (AFM), a piezoelectric tube scanner is used to position the sample underneath the measurement probe. Oscillations stemming from the weakly damped resonances of the tube scanner are a major source of image distortion, putting a limitation on the achievable imaging speed. This paper demonstrates active damping of these oscillations in multiple scanning axes withou...
متن کاملActive damping in precision equipment using piezo
In this paper, the rotational vibration in the linearly actuated precision machines with low damping is discussed. This so called Rocking mode is e.g. caused by the compliance in the guiding system of a linear actuator and leads to a long settling time of the end-effector. Another problem occurs when a feedback motion controller is applied to the plant. Complex poles present in the loop transfe...
متن کاملDesign and Analysis of Smart Structures for Active Vibration Control using Piezo-Crystals
The present work considers the active vibration control of beam like structures with laminated piezoelectric sensor and actuator layers bonded on top and bottom surfaces of the beam. A finite element model based on Euler-Bernoulli beam theory has been developed. The contribution of the piezoelectric sensor and actuator layers on the mass and stiffness of the beam has been considered with modeli...
متن کاملViscoelastic Damping and Piezo-electric Control of Structures Subjected to Aerodynamic Noise∗
Analytical and numerical simulations are carried out in order to identify physical parameters affecting acoustic and motion control by viscoelastic piezo-electric and material damping. Numerical simulations in terms of critical parameters, such as relaxation functions of the structure and piezo-electric devices, aerodynamic coefficients, Mach number, are carried out to evaluate their sensitivit...
متن کاملSemi-active friction damping of large space truss structures
The present approach for vibration suppression of flexible structures is based on friction damping in semi-active joints. At optimal locations conventional rigid connections of a large truss structure are replaced by semi-active friction joints. Two different concepts for the control of the normal forces in the friction interfaces are implemented. In the first approach each semi-active joint ha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2019
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2019.11.732