Active Hyperspectral Sensor Based on MEMS Fabry-Pérot Interferometer
نویسندگان
چکیده
منابع مشابه
A Microfluidic-Based Fabry-Pérot Gas Sensor
We developed a micro-gas detector based on a Fabry-Pérot (FP) cavity embedded in a microfluidic channel. The detector was fabricated in two steps: a silicon substrate was bonded to a glass slide curved with a micro-groove, forming a microfluidic FP cavity; then an optical fiber was inserted through a hole drilled at the center of the groove into the microfluidic FP cavity, forming an FP cavity....
متن کاملA Label-free Protein Sensor Based on Mems Fabry-perot Interferometer Integrated with Silicon Photodiode
ABSTRACT We have newly developed a label-free protein sensor based on MEMS Fabry-Perot interferometer integrated with a photodiode, which utilizes nonlinear optical effect of the Fabry-Perot resonance to enhance the sensitivity of surface stress. A parylene was used for a deformable membrane of the protein sensor because of the high optical transmittance and low Young’s modulus. Theoretical sig...
متن کاملThree Cavity Tunable MEMS Fabry Perot Interferometer
In this paper a four-mirror tunable micro electro-mechanical systems (MEMS)Fabry Perot Interferometer (FPI) concept is proposed with the mathematical model. Thespectral range of the proposed FPI lies in the infrared spectrum ranging from 2400 to 4018(nm). FPI can be finely tuned by deflecting the two middle mirrors (or by changing the threecavity lengths). Two different cases were separately co...
متن کاملTunable Fabry-Pérot interferometer based on nanoporous anodic alumina for optical biosensing purposes
Here, we present a systematic study about the effect of the pore length and its diameter on the specular reflection in nanoporous anodic alumina. As we demonstrate, the specular reflection can be controlled at will by structural tuning (i.e., by designing the pore geometry). This makes it possible to produce a wide range of Fabry-Pérot interferometers based on nanoporous anodic alumina, which a...
متن کاملFabry-Pérot-based surface plasmon resonance sensors.
A new sensing approach based on the use of an optical Fabry-Pérot (FP) cavity in conjunction with surface plasmon resonance (SPR) is proposed and theoretically investigated. The impact of the SPR on the intensity and phase response of the proposed sensor structure is evaluated using a modified FP model that takes into account the SPR effect. Compared to the conventional optical-phase-detection-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2019
ISSN: 1424-8220
DOI: 10.3390/s19092192