Active Vibration Control of Cantilever Beam by Using Optimal LQR Controller
نویسندگان
چکیده
منابع مشابه
Optimal Control of Double Inverted Pendulum Using LQR Controller
Double Inverted Pendulum is a nonlinear system, unstable and fast reaction system. Double Inverted Pendulum is stable when its two pendulums allocated in vertically position and have no oscillation and movement and also inserting force should be zero. The aim of the paper is to design and performance analysis of the double inverted pendulum and simulation of Linear Quadratic Regulator (LQR) con...
متن کاملVibration Control of Cantilever Beam Based on Eddy Current Damping
A great difficulty is faced in the design of such structures due to the fact that the reduction in weight results in low rigidity and reduced vibration characteristics. Apart from the vibration is effectively controlled; it may destabilize the system and may, very often, result in complete failure of the system. Several advanced applications, such as those in jet fighters, automobiles and space...
متن کاملActive vibration control of a piezoelectric beam using PID controller: Experimental study
Vibration suppression of smart beams using the piezoelectric patch structure is presented in the present work. The smart system consists of a beam as the host structure and piezoceramic patches as the actuation and sensing elements. An experimental set-up has been developed to obtain the active vibration suppression of smart beam. The set-up consists of a smart cantilever beam, the data acquisi...
متن کاملActive Suspension vibration control using Linear H-Infinity and optimal control
In this paper, the 1/4 vehicle model have been simulated. The vehicle body acceleration using optimal control has been optimized. The vehicle ride comfort is achieved by using robust control, and it has been compared with optimal control. The active suspension can help the vehicle to have a good dynamic behavioral. In this paper, two degrees of freedom dynamic vibration model of a general ve...
متن کاملEfficiency of Active Control of Beam Vibration Using PZT Patches
This study is aimed to explore efficiency problems of using PZT patches in active vibration control of beams. The PZT patches are surface-bonded as actuators and strain gages are used as sensors. Distributed moment forcing mode is adopted to derive the control authority of actuators. Uniform beam model is applied when the mass and stiffness of PZT patches are ignored. Stepped beam model is then...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering
سال: 2018
ISSN: 2520-3339,1726-4073
DOI: 10.31026/j.eng.2018.11.01