Active vibration control of piezoelectric plates
نویسندگان
چکیده
منابع مشابه
Active Vibration Control of Piezoelectric Intelligent Structures
The study of the applications of piezoelectric materials in the active vibration control of flexible structures has been ongoing for more than a decade. Based on the Linear Quadratic Gauss (LQG) optimal control method, the paper introduces an effective procedure to suppress the vibration of flexible structures with the sensors/actuators are symmetrically collocated on both sides of the same pos...
متن کاملPiezoelectric Power Requirements for Active Vibration Control
This paper presents a method for predicting the power consumption of piezoelectric actuators utilized for active vibration control. Analytical developments and experimental tests show that the maximum power required to control a structure using surface-bonded piezoelectric actuators is independent of the dynamics between the piezoelectric actuator and the host structure. The results demonstrate...
متن کاملAdaptive Piezoelectric Absorber for Active Vibration Control
Abstract: Passive vibration control solutions are often limited to working reliably at one design point. Especially applied to lightweight structures, which tend to have unwanted vibration, active vibration control approaches can outperform passive solutions. To generate dynamic forces in a narrow frequency band, passive single-degree-of-freedom oscillators are frequently used as vibration abso...
متن کاملFuzzy Logic Based Active Vibration Control of Piezoelectric Stewart Platform
This paper demonstrates the potential of applying PDlike fuzzy logic controller for active vibration control of piezoelectric Stewart platforms. Through simulation, the control authority of the piezo stack actuators for effectively damping the Stewart platform vibration can be evaluated for further implementation of the system. Each leg of the piezoelectric Stewart platform consists of a linear...
متن کاملOptimizing the Performance of Piezoelectric Actuators for Active Vibration Control
This paper discusses the selection process for piezoelectric transducers (PZT) used as actuator elements for suppressing vibrations in a flexible beam system. The effects of changing physical parameters such as the relative thickness of the piezoelectric ceramic with respect to the beam, the optimum location of the PZT actuator, and the length of the PZT are studied based on the singular value ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2014
ISSN: 2261-236X
DOI: 10.1051/matecconf/20141602006