Activity Coefficient of Silicon in Molten Fe-C-B-Si Alloy.
نویسندگان
چکیده
منابع مشابه
Hydrogen Effects on an Amorphous Fe-Si-B Alloy
HYDROGEN interaction with amorphous alloys has Ribbons (,25-mm thick) of amorphous Fe80B11Si9 were been studied extensively due to both scientific and technoused for this research. The ribbons were produced by planarlogical interest. In the framework of a more comprehensive flow casting and were kindly supplied by AlliedSignal Inc. investigation of hydrogen interaction with amorphous and (Parsi...
متن کاملMo-Si-B Alloy Development
Alloys consisting of the phases α-Mo (Mo solid solution), Mo3Si, and Mo5SiB2 (“T2”) were fabricated by ingot and powder metallurgy. A novel powder-metallurgical processing technique was developed which allows the fabrication of silicide alloys with a continuous α-Mo matrix. In these alloys the relatively ductile and tough α-Mo matrix acts as a “binder” for brittle silicide particles. An alloy p...
متن کاملSEGREGATION AT SPECIAL GRAIN BOUNDARIES IN Fe-Si ALLOY BICRYSTALS
The segre ation of silicon to the C=3, 112) and C=S, (013) symmetrical grain boundaries 1 was studied in well-fefined bicrystals of an Fe-l .9 at%Si alloy annealed in the range 773 1173 K using Auger electron spectroscopy. The segregation enthal y, AI1 = -8.1 * 0.5 kJ/mol, and entropy, AS = -69 r 0.4 i/(mol K), were determined for the (013f grain boundary in the temperature range 973 1173 K. Fo...
متن کاملModification of Primary Si Crystals and Fe-rich Intermetallics in LM28 Al Alloy Fabricated Through Thixoforming
In the present research, thixoforming route was carried out in order to enhance the microstructural features of LM28 piston alloy. Typical microstructure of this alloy was composed of coarse, polygonal primary silicon particles, eutectic matrix and intermetallic phases. Thermal analysis was carried out to study the solidification path of the base alloy and determine the major arrest temperature...
متن کاملTransformation Reversibility in Fe-Mn-Si Shape Memory Alloy
The change of the surface relief associated with stress-induced epsilon martensite before and after the reverse transformation in an Fe-33%Mn-6%Si alloy (Msz264K) has been investigated. The permanent strain of a 2.7% tensile-strained specimen was 1.1% after the reverse transformation. In this specimen, a large part of surface relief still remained after heating to 623K (above Af). When five tra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1996
ISSN: 0915-1559
DOI: 10.2355/isijinternational.36.1151