Adaptive PID Control for Servo Problem of MIMO Systems
نویسندگان
چکیده
منابع مشابه
Concurrent Relay-PID Control for Motor Position Servo Systems
A Concurrent Relay-PID controller (CRPID) for motor position servo systems is proposed in this paper. The proposed controller is composed of a deadband-relay subcontroller and a parallel PID subcontroller. The deadband-relay subcontroller is capable of improving the transient system performance while the PID subcontroller is responsible for near steady state system regulation. Systematic design...
متن کاملNN-PID Based Control of MIMO Systems
Due to simple functioning of PID controllers it is widely used in control systems. But tuning the parameters of controller is still a formidable challenge. Also, once the parameters are well tuned satisfactory performance cannot be guaranteed due to process changes and aging effect, so a regular tuning is needed which takes considerable time and may not be practically effective. Most of the con...
متن کاملAdaptive Gain PID Control for Mechanical Systems
The design and use of PID controllers is a part of what has been denominated Classical Control, which as the name implies, has been studied for many years (DiStefano et al. 1996), however it continues to be a source for research (Alvarez et al. 2008), (Ang et al. 2008), (Su et al. 2010). The structure of the controller contains a differential term to aid in the reduction of system friction and ...
متن کاملchannel estimation for mimo-ofdm systems
تخمین دقیق مشخصات کانال در سیستم های مخابراتی یک امر مهم محسوب می گردد. این امر به ویژه در کانال های بیسیم با خاصیت فرکانس گزینی و زمان گزینی شدید، چالش بزرگی است. مقالات متعدد پر از روش های مبتکرانه ای برای طراحی و آنالیز الگوریتم های تخمین کانال است که بیشتر آنها از روش های خاصی استفاده می کنند که یا دارای عملکرد خوب با پیچیدگی محاسباتی بالا هستند و یا با عملکرد نه چندان خوب پیچیدگی پایینی...
Minimum-time Feedforward Plus PID Control for MIMO Systems ⋆
In this paper we propose a technique for the determination of a feedforward control law to be applied to a closed-loop PID-based control system for a multi-input multi-output process in order to achieve a minimum-time transition of the outputs subject to constraints on both the control variables and the system outputs. The optimal command inputs are determined by suitably approximating the stat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Society of Instrument and Control Engineers
سال: 2008
ISSN: 0453-4654
DOI: 10.9746/ve.sicetr1965.44.583