Additional hardening in harmonic structured materials by strain partitioning and back stress
نویسندگان
چکیده
منابع مشابه
/-Integral Estimates for Strain-Hardening Materials in Ductile Fracture Problems
A finite-element procedure is developed to analyze plane ductile fracture problems in the presence of largescale yielding near the crack tip. Strain and stress singularities near the crack tip, corresponding to the strainhardening material model, are embedded in elements near the crack tip. The developed elastic-plastic incremental finite-element method is based on a hybrid displacement model. ...
متن کاملUniaxial/Biaxial Stress Paradox in Optical-Materials Hardening
174 LLE Review, Volume 79 Owing to its excellent homogeneity and low-intrinsic absorption properties, fused silica remains the preferred material for high-power laser applications over a wide wavelength range, but especially in the UV. In particular, large-aperture glass and excimer lasers, such as Nova, Beamlet, OMEGA, NIKE, and, in the foreseeable future, the National Ignition Facility (NIF),...
متن کاملOn the Characterization of Strain Hardening Cement-based Materials by Inverse Analysis of Bending Tests
An inverse analyses procedure for determining the mechanical material properties of strain hardening cement-based materials is presented. It allows to determine the uniaxial stressstrain curve up to the material’s localization point on the basis of the results of four-point bending tests. In these tests, the beam curvature is measured and serves as input value for the inverse analysis. An evolu...
متن کاملUltrahigh stress and strain in hierarchically structured hollow nanoparticles.
Nanocrystalline materials offer very high strength but are typically limited in their strain to failure, and efforts to improve deformability in these materials are usually found to be at the expense of strength. Using a combination of quantitative in situ compression in a transmission electron microscope and finite-element analysis, we show that the mechanical properties of nanoparticles can b...
متن کاملNonproportional Loading Effects on Elastic-plastic Behavior Based on Stress Resultants for Thin Plates of Strain Hardening Materials
Ahstraet-A stress resultant constitutive law in rate form is constructed for power-law hardening materials. The change of plate thickness is considered in the constitutive law. The elastic-plastic behavior of a plate element based on the stress resultant constitutive law under uniaxial combined tension and bending is determined under a limited number of nonproportional and unloading paths. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Letters
سال: 2018
ISSN: 2166-3831
DOI: 10.1080/21663831.2018.1439115