Adhesion of Fluidized Bed Particles on Biomass Char in Fluidized Bed Rapid Pyrolysis
نویسندگان
چکیده
منابع مشابه
The Mechanism of Char Ignition in Fluidized Bed Combustors
Knowledge about ignition processes of coal in fluidized beds is of importance for the start-up and dynamic control of these combustors. Initial experiments in a transparent fluidized bed scale model showed the existence of a considerable induction period for the ignition of char, especially at low bed temperatures (e.g., 800-950K for bituminous coal). This paper focuses on char-ignition delay a...
متن کاملPyrolysis of Softwood Carbohydrates in a Fluidized Bed Reactor
In the present work pyrolysis of pure pine wood and softwood carbohydrates, namely cellulose and galactoglucomannan (the major hemicellulose in coniferous wood), was conducted in a batch mode operated fluidized bed reactor. Temperature ramping (5 degrees C/min) was applied to the heating until a reactor temperature of 460 degrees C was reached. Thereafter the temperature was kept until the rele...
متن کاملNumerical simulation of biomass fast pyrolysis in fluidized bed and auger reactors
Seeking a clean alternative energy resource is inevitable because of the limited fossil fuel energy resources and greenhouse gas emissions issue. Recently, advances in chemical and fuel processing technologies allow us to convert biomass to energy products with high energy density and value. Fast pyrolysis process is among the promising technologies for converting biomass to bio-oil and combust...
متن کاملGASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS
This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...
متن کاملSimulation of Biomass Gasification in Fluidized Bed Using Aspen Plus
Gasification is a thermo-chemical process to convert carbon-based compounds such as biomass and coal into a gaseous fuel. Among the various types of gasification methods, fluidized bed gasification is one which is considered as more efficient method than others as biomass is fluidized in a mixture of air/oxygen and steam. In the present study, a comprehensive steady state process model has been...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Energy
سال: 2013
ISSN: 0916-8753,1882-6121
DOI: 10.3775/jie.92.327