Advanced Cementitious Materials: Mechanical Behavior, Durability, and Volume Stability
نویسندگان
چکیده
منابع مشابه
Analysis of Durability of Advanced Cementitious Materials for Rigid Pavement Construction in California
The cementitious materials under consideration by Caltrans for rigid pavement construction may be classified into four categories: Portland cements and blends, calcium aluminate cements and blends, calcium sulfoaluminate cements, and fly ash-based cements. With the exception of Portland cements, most of the cementitious materials under consideration have not been extensively used for pavement c...
متن کاملCrack Stability in the Fracture of Cementitious Materials
The aim of the present study is to investigate the stability of crack propagation in cementitious materials. Tests were conducted on bend specimens in three-point and four-point loading conditions.Three-point bend specimens showed stable crack growth for mortar, normal strength and high strength concrete specimens. Alternatively, four-point bend specimens showed catastrophic failure for mortar ...
متن کاملDurability of Mortar Incorporating Ferronickel Slag Aggregate and Supplementary Cementitious Materials Subjected to Wet–Dry Cycles
This paper presents the strength and durability of cement mortars using 0–100% ferronickel slag (FNS) as replacement of natural sand and 30% fly ash or ground granulated blast furnace slag (GGBFS) as cement replacement. The maximum mortar compressive strength was achieved with 50% sand replacement by FNS. Durability was evaluated by the changes in compressive strength and mass of mortar specime...
متن کاملStress-Strain Behavior of Cementitious Materials with Different Sizes
The size dependence of flexural properties of cement mortar and concrete beams is investigated. Bazant's size effect law and modified size effect law by Kim and Eo give a very good fit to the flexural strength of both cement mortar and concrete. As observed in the test results, a strong size effect in flexural strength is found in cement mortar than in concrete. A modification has been suggeste...
متن کاملThe Influence of Ultrafine Filler Materials on Mechanical and Durability Characteristics of Concrete
This paper aims at investigating the influence of partial replacement of Portland cement with ultrafine fillers compared to limestone powder on the durability and mechanical characteristics of concrete. For this purpose, ultrafine calcium carbonate materials with different specific surface areas of 9.7 and 15.1 m2/g and limestone powder (0.72 m2/g) were used. The results indicate that the ultra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2017
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2017/5862531