Advanced process technologies: Plasma, direct-write, atmospheric pressure, and roll-to-roll ALD

Anode Layer Linear Ion Source for Roll-to-Roll Process from 300 mm to 1550 mm

Roll-to-roll (RTR) process requires a linear surface treatment source in various processes such as pre-treatment, etching, and deposition. For high speed and large width processes the linear source should have superior characteristics that can be applied to 100~300 m/mim process and large width treatment up to 2 m. Several linear surface treatment sources have been proposed to the RTR process. ...

Stress Analysis and Energy Estimation in Cold-Roll Forming Process

In this article, stress analysis and energy estimation during cold-roll forming of symmetrical channel sections have been discussed. Geometry of sheet strip is pre-estimated by a shape function. Then longitudinal, transversal and shear strains have been calculated. Using both the Levy-Mises and the Prandtl Reuss equations, and also considering the Bauschinger effect, stress distributions have b...

Cold roll forming process pdf

Investigation of the mechanical properties of cold roll welded Brass and IF steelproduced by cold roll bonding process

Cold roll bonding (CRB) is a solid state welding process, where the bonding is established by compressive plastic deformation of the metals. This process is applicable for a large number of materials. In addition, materials that cannot be bonded by traditional fusion-based processesmight be bonded by CRB process. In this research, cold roll welding of brass and IF steel was studied .The effects...

Effects of Preheat Supply on Embossed Pattern Depth in Roll-to-Roll Process

In this study, we examined the sensitivity of embossed pattern depth to preheat supply and cooling, and also tested how pattern type and density affect the embossed depth. The main factors such as roller temperature, roller speed, and applied force that mostly affect embossed pattern qualities of roll-to-roll hot embossing were determined based on the response surface methodology. Eight conditi...