Advanced Recovery Techniques for Waste Materials from IT and Telecommunication Equipment Printed Circuit Boards
نویسندگان
چکیده
منابع مشابه
Leaching studies for metals recovery from printed circuit boards scrap
In this paper, the leaching behavior of the major metals present in printed circuit boards waste is evaluated, aiming at its recycling by hydrometallurgy. Several leachants were compared (sulfuric, hydrochloric and nitric acids, at 2 M H concentration), at temperatures of 25oC and 90oC and 4 hours of reaction time. Sulfuric acid leaching was not very promising concerning metals dissolution bein...
متن کاملEnergy Recovery from Waste of Printed Circuit Boards in Plasmatron Plasma Reactor
This paper presents results of research on the use of plasma technology for printed circuit boards (PCB) processing for metals and energy recovery. In the Industrial Research Institute for Automation and Measurements, a test stand was built allowing experiments on plasma process with throughput of 800 kg per day. Brief examination of PCB waste was carried out, focusing on identification of its ...
متن کاملRecovery of high purity precious metals from printed circuit boards.
Waste printed circuit boards (WPCB) have an inherent value because of the precious metal content. For an effective recycling of WPCB, it is essential to recover the precious metals. This paper reports a promising method to recover the precious metals. Aqua regia was used as a leachant and the ratio between metals and leachant was fixed at 1/20 (g/ml). Silver is relatively stable so the amount o...
متن کاملBiodegradable materials for multilayer transient printed circuit boards.
Biodegradable printed circuit boards based on water-soluble materials are demonstrated. These systems can dissolve in water within 10 mins to yield end-products that are environmentally safe. These and related approaches have the potential to reduce hazardous waste streams associated with electronics disposal.
متن کاملA Review on Printed Circuit Boards Waste Recycling Technologies and Reusing of Recovered Nonmetallic Materials
From the use of renewable resources and environmental protection viewpoints, recycling of waste printed circuit boards (PCBs) receives wide concerns as the amounts of scrap PCBs increases dramatically In recent years there has been increasing concern about the growing volume of end of life electronics and the fact that much of it is consigned to landfill w ithout any attempt being made to recyc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainability
سال: 2019
ISSN: 2071-1050
DOI: 10.3390/su12010074