Aeroelastic Topology Optimization of Blade-Stiffened Panels
نویسندگان
چکیده
منابع مشابه
Aeroelastic Wingbox Stiffener Topology Optimization
This work considers an aeroelastic wingbox model seeded with run-out blade stiffeners along the skins. Topology optimization is conducted within the shell webs of the stiffeners, in order to add cutouts and holes for mass reduction. This optimization is done with a global-local approach in order to moderate the computational cost: aeroelastic loads are computed at the wing-level, but the topolo...
متن کاملLevel-Set Topology Optimization with Aeroelastic Constraints
Level-set topology optimization is used to design a wing considering skin buckling under static aeroelastic trim loading, as well as dynamic aeroelastic stability (flutter). The level-set function is defined over the entire 3D volume of a transport aircraft wing box. Therefore, the approach is not limited by any predefined structure and can explore novel configurations. The Sequential Linear Pr...
متن کاملOptimization of Composite, Stiffened, Imperfect Panels under Combined Loads for Service in the Postbuckling Regime
Local buckling and postbuckling of panels stiffened by stringers and rings and subjected to combined in-plane loads is explored with the use of a single module model that consists of one stringer and a width of panel skin equal to the stringer spacing. The cross-section of the skin-stringer module is discretized and the displacement field is assumed to vary trigonometrically in the axial direct...
متن کاملDesign optimization of stiffened composite panels with buckling and damage tolerance constraints
The design of stiffened, composite wing panels must satisfy a range of requirements related to performance, economy and safety. In particular, the design must be damage tolerant to satisfy a number of different performance requirements for various states of damage. To obtain an optimum configuration that satisfies these requirements simultaneously, optimization code PANOPT was extended with a m...
متن کاملFracture Analysis of the Faa/nasa Wide Stiffened Panels
This paper presents the fracture analyses conducted on the FAA/NASA stiffened and unstiffened panels using the STAGS (STructural Analysis of General Shells) code with the critical crack-tip-opening angle (CTOA) fracture criterion. The STAGS code with the “plane-strain” core option was used in all analyses. Previous analyses of wide, flat panels have shown that the high-constraint conditions aro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Aircraft
سال: 2014
ISSN: 0021-8669,1533-3868
DOI: 10.2514/1.c032500