Aeroelastic Wingbox Stiffener Topology Optimization
نویسندگان
چکیده
منابع مشابه
Aeroelastic Wingbox Stiffener Topology Optimization
This work considers an aeroelastic wingbox model seeded with run-out blade stiffeners along the skins. Topology optimization is conducted within the shell webs of the stiffeners, in order to add cutouts and holes for mass reduction. This optimization is done with a global-local approach in order to moderate the computational cost: aeroelastic loads are computed at the wing-level, but the topolo...
متن کاملLevel-Set Topology Optimization with Aeroelastic Constraints
Level-set topology optimization is used to design a wing considering skin buckling under static aeroelastic trim loading, as well as dynamic aeroelastic stability (flutter). The level-set function is defined over the entire 3D volume of a transport aircraft wing box. Therefore, the approach is not limited by any predefined structure and can explore novel configurations. The Sequential Linear Pr...
متن کاملOptimization of an Aeroservoelastic Wing with Distributed Multiple Control Surfaces
This paper considers the aeroelastic optimization of a subsonic transport wingbox under a variety of static and dynamic aeroelastic constraints. Three types of design variables are utilized: structural variables (skin thickness, stiffener details), the quasi-steady deflection scheduling of a series of control surfaces distributed along the trailing edge for maneuver load alleviation and trim at...
متن کاملOptimal Stiffener Design for Interior Sound Reduction Using a Topology Optimization Based Approach
A topology optimization based approach is proposed to study the optimal configuration of stiffeners for the interior sound reduction. Since our design target is aimed at reducing the low frequency noise, a coupled acoustic-structural conservative system without damping effect is considered. Modal analysis method is used to evaluate the interior sound level for this coupled system. To formulate ...
متن کاملA geometry constraint handling technique for stiffener layout optimization problem
Beam stiffeners have frequently been used for raising natural frequencies of base structures. In stiffener layout optimization problems, most of the previous researches considering the position and/or the length of the stiffener as design variables dealt with structures having just simple convex shapes such as a square or rectangle. The reason was because concave shape structures have difficult...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Aircraft
سال: 2018
ISSN: 0021-8669,1533-3868
DOI: 10.2514/1.c034653