Air-water flows in partially-filled conduits
نویسندگان
چکیده
منابع مشابه
Detonation and Transition to Detonation in Partially Water-Filled Pipes
Detonations and deflagration-to-detonation transition (DDT) are experimentally studied in horizontal pipes which are partially filled with water. The gas layer above the water is stoichiometric hydrogen–oxygen at 1 bar. The detonation wave produces oblique shock waves in the water, which focus at the bottom of the pipe due to the curvature of the walls. This results in peak pressures at the bot...
متن کاملExperimental study of coating flows in a partially-filled horizontally rotating cylinder
We describe a number of different phenomena seen in the free-surface flow inside a partially filled circular cylinder which is rotated about its horizontal axis of symmetry. At low angular velocities the flow settles into a steady two-dimensional flow with a front where the coating film coalesces with the pool at the bottom of the cylinder. This mode becomes unstable at higher angular velocitie...
متن کاملAir and water flows in a vertical sand column
[1] The unsteady state drainage of water from a vertical sand column with and without a finer layer on the top was studied theoretically and experimentally to investigate the airflow generated by the finer layer. The sand column, saturated at its lower portion and initially in the condition of hydrostatic equilibrium, is drained at its bottom at constant head. The results show that significant ...
متن کاملNumerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid
The buoyancy-driven fluid flow and heat transfer in a square cavity with partially active side walls filled with Cu-water nanofluid is investigated numerically. The active parts of the left and the right side-walls of the cavity are maintained at temperatures Th and Tc, respectively, with Th>Tc. The enclosure’s top and bottom walls, as well as, the inactive parts of its side walls are kept insu...
متن کاملScale Effects in Modelling Two-phase Air-water Flows
Beside analytical approaches, physical modelling represents probably the oldest design tool in hydraulic engineering. For free surface flows, the similitude according to a Froude similarity allows for a correct representation of the dominant forces, namely gravity and inertia. In parallel, fluid constants such as the surface tension and the viscosity might be incorrectly reproduced, affecting t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Hydraulic Research
سال: 1997
ISSN: 0022-1686,1814-2079
DOI: 10.1080/00221689709498396