Airfoil leading edge blowing to control bow shock waves

Symmetric airfoil geometry effects on leading edge noise.

Computational aeroacoustic methods are applied to the modeling of noise due to interactions between gusts and the leading edge of real symmetric airfoils. Single frequency harmonic gusts are interacted with various airfoil geometries at zero angle of attack. The effects of airfoil thickness and leading edge radius on noise are investigated systematically and independently for the first time, at...

Leading Edge Separation Criterion for an Oscillating Airfoil

AD-P004 168 AD-P004 169 TITLE: Superroaneuverability. Wing Rock Flov Phenomena. Potential Applications of Forced Unsteady Flows. Unsteady Stall Penetration of an Oscillating Swept Wing. Simultaneous Flow Visualization and Unsteady Lift Measurement on an Oscillating Lifting Surface. A Visual Study of a Delta Wing in Steady and Unsteady Motion. Comparative Visualization of Accelerating Flow aroun...

Simulation and Optimization of an Airfoil with Leading Edge Slat

A gradient-based optimization is used in order to improve the shape of a leading edge slat upstream of a DU 91-W2-250 airfoil. The simulations are performed by solving the Reynolds-Averaged Navier-Stokes equations (RANS) using the open source CFD code OpenFOAM. Gradients are computed via the adjoint approach, which is suitable to deal with many design parameters, but keeping the computational c...

Flow Control of Leading Edge Separation on Airfoil Using Dbd Plasma Actuator

Airfoil Leading and Trailing Edge Separation Control Using SDBD Plasma Actuators

Wind tunnel experiments were conducted to understand boundary layer separation control on airfoils. The objective of this research was to better implement flow control strategies with single dielectric barrier discharge (SDBD) plasma actuator designs for airfoils that exhibit both leading and trailing edge stall characteristics at realistic flight speeds and Reynolds numbers. The NASA energy ef...