Al-Si alloy for thermal storage applications-a review
نویسندگان
چکیده
منابع مشابه
An Overview of the Development of Al-Si-Alloy Based Material for Engine Applications
The development of Al-Si alloy and its based material for engine application is reported in this paper, focusing on improving the material’s fatigue limit and wear resistance, which are two important properties for engine block materials. The paper begins with a description of the microstructure (primary and eutectic phases, intermetallics, and casting defects) of Al-Si alloy and its effects on...
متن کاملProbabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines
The spray-deposited Si-Al CE9F alloy is a new material used for space applications involving temperature gradient. Thermal stresses arise and may affect the mechanical integrity of the components. It is therefore necessary to assess the critical temperature gradient to avoid failure. Hence this paper deals with the effect of temperature on the mechanical properties of the Si-Al CE9F alloy from ...
متن کاملEffect of Al–5Ti–C Master Alloy on the Microstructure and Mechanical Properties of Hypereutectic Al–20%Si Alloy
Al-5Ti-C master alloy was prepared and used to modify hypereutectic Al-20%Si alloy. The microstructure evolution and mechanical properties of hypereutectic Al-20%Si alloy with Al-5Ti-C master alloy additions (0, 0.4, 0.6, 1.0, 1.6 and 2.0 wt%) were investigated. The results show that, Al-5Ti-C master alloy (0.6 wt%, 10 min) can significantly refine both eutectic and primary Si of hypereutectic ...
متن کاملActive Packaging for Food Applications - A Review
The purpose of food packaging is to preserve the quality and safety of the food it contains from the time of manufacture to the time it is used by the consumer. Recently, the demand for safe and high quality foods, as well as changes in consumer preferences have led to the development of innovative and novel approaches in food packaging technology. One such development is the active food packag...
متن کاملInfluence of Modifying Mixtures on Si Crystal Formation in Al-7%Si Alloy
Using scanning and transmission electron microscopy, we studied silicon particles formed during the solidification of Al-7%Si alloy when different modifying mixtures were introduced into the melt: (1) a mixture of ultrafine powders Na3AlF6 + K2ZrF6 + TiO2 + ZrO2; (2) K2ZrF6; and (3) the flux Arsal. By differential scanning calorimetry, it was established that modifying mixtures significantly in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2019
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1378/4/042038