Al2O3-TiB2 nanocomposite coating deposition on Titanium by Air Plasma Spraying
نویسندگان
چکیده
منابع مشابه
A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition
In this paper, we reviewed researches about the titanium nitride (TiN) and titanium carbide (TiC) single and multilayer coatings. These coatings were deposited by the plasma assisted chemical vapor deposition (PACVD) technique. Plasma-based technologies are used for the processing of thin films and coatings for different applications such as automobile and aerospace parts, computer disc drives,...
متن کاملCoating of Carbon Fibre Reinforced PEEK Implants with Titanium by Vapour Plasma Spraying for Improved Bone Apposition
Introduction: The success of an orthopaedic implant depends on several factors, such as implant material properties, design and fixation technique as well as bone apposition around the implant. Polyetheretherketone (PEEK) is a composite thermoplastic biomaterial exhibiting biochemical and biomechanical properties suitable for load-bearing orthopaedic implants. Two advantages of carbon fibre rei...
متن کاملPREPARATION OF CATALYTIC COATING OF TITANIUM OXIDE BY MEANS OF ELECTROLYTIC DEPOSITION
In the current research, the optimum conditions for the electrolytic deposition of TiO2 coatings on titanium pieces were experimentally investigated. Flat pieces of commercially available titanium with dimensions of 50 x20 x3 mm were used as the anode and cathode electrodes. The coatings were applied on the cathode in an electrolyte solution essentially from water and methanol, containing diffe...
متن کاملMicrostructure and Tribological Performance of TiB2-NiCr Composite Coating Deposited by APS
Nickel chromium (NiCr) powders with different titanium diboride (TiB2) additions (20, 40 and 60 wt %) were prepared with a mechanical alloying method and then sprayed using an air plasma spraying technology. The microstructure and phase composite of the powders and the cross-sections of deposited coatings were analyzed with a scanning electronic microscope and X-ray diffraction. The tribologica...
متن کاملWear resistant multilayer nanocomposite WC1-x/C coating on Ti- 6Al-4V titanium alloy
A significant improvement of tribological properties on Ti-6Al-4V has been achieved by developed in this study multilayer treatment method for the titanium alloys. This treatment consists of an intermediate 2 μm thick TiCxNy layer which has been deposited by the reactive arc evaporation onto a diffusion hardened material with interstitial O or N atoms by glow discharge plasma in the atmosphere ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2018
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2018.04.186