Alginate microsphere fabrication using bipolar wave-based drop-on-demand jetting
نویسندگان
چکیده
منابع مشابه
Effect of Meniscus Damping Ratio on Drop-on-Demand Electrohydrodynamic Jetting
Drop-on-demand (DOD) electrohydrodynamic (EHD) jet printing uses a nozzle and pulsated electric fields to eject small ink droplets of functional material to the appointed spot of a substrate at the appointed time, which offers solutions of high resolution patterning for fabrication of printed electronics, bioengineering, and display. Because the EHD jet connects fine drops to yield a fine patte...
متن کاملContinuous Jetting of Alginate Microfiber in Atmosphere Based on a Microfluidic Chip
We present a method based on a microfluidic chip that produces continuous jetting of alginate microfiber in the atmosphere to facilitate its collection and assembly. Through the analysis of the factors influencing the microfiber jetting, the principle and some microfluidic chip design criteria are discussed. A special nozzle is designed near the chip outlet, and deionized water is introduced in...
متن کاملStandardized Sample Preparation Using a Drop-on-Demand Printing Platform
Hazard detection systems must be evaluated with appropriate test material concentrations under controlled conditions in order to accurately identify and quantify unknown residues commonly utilized in theater. The existing assortment of hazard reference sample preparation methods/techniques presents a range of variability and reproducibility concerns, making it increasingly difficult to accurate...
متن کاملMaskless Lithography Using Drop-On-Demand Inkjet Printing Method
Writing process patterns directly on a substrate with small liquid droplets generated by Drop-On-Demand (DOD) inkjet devices offers a low cost, non-contact, low temperature, flexible, and data driven patterning approach. Existing inkjet printheads have a limited number of inkjet devices, which generate droplets on the scale of tens of microns. In our research, we have developed a monolithic ink...
متن کاملPerformance Improvement of a Drop-on-Demand Inkjet Printhead using an Optimization-Based Feedforward Control Method
The printing quality delivered by a Drop-on-Demand (DoD) inkjet printhead is limited due to the residual oscillations in the ink channel. The maximal jetting frequency of a DoD inkjet printhead can be increased by quickly damping the residual oscillations and by bringing in this way the ink channel to rest after jetting the ink drop. This paper proposes an optimization-based method to design th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Manufacturing Processes
سال: 2012
ISSN: 1526-6125
DOI: 10.1016/j.jmapro.2011.11.001