Al₂O₃-TiO₂ coatings deposition by intermixed and double injection SPS concepts

Manufacturing nanostructured YSZ coatings by suspension plasma spraying (SPS): effect of injection parameters

The suspension plasma spraying process is investigated by using shadow imaging techniques to appreciate the different trajectories of the liquid jet interacting with a DC highenergy plasma flow. Then, the modelling of different liquid injections (isolated droplet, train of droplets and continuous jet) helps to determine which injection type must be preferred. From that, coating depositions have...

SiC coatings grown by liquid injection chemical vapor deposition using single source metal-organic precursors

an investigation into translation of cultural concepts by beginner and advance student using think – aloud protocols

this research aims at answering the questions about translation problems and strategies applied by translators when translating cultural concepts. in order to address this issue, qualitative and quantitative study were conducted on two groups of subjects at imam reza international university of mashhad. these two groups were assigned as beginner and advanced translation students (10 students). ...

Optimization of Deposition Parameters for α-Al2O3 Coatings by Double Glow Plasma Technique

The parameters to prepare α-Al2O3 coatings by double glow plasma technique were optimized to obtain dense and thick α-Al2O3 coatings on 316 L stainless steel at low temperature of 580 °C. The parallel distance between the source electrode and the substrate, working pressure, source electrode voltage, and workpiece electrode voltage were designed by L9 Orthogonal array design. The thickness, mic...

Lubricant-Infused Nanoparticulate Coatings Assembled by Layer-by-Layer Deposition

© 2014 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim 1 wileyonlinelibrary.com coatings on windows, lenses or solar cells, repellent or protective clothing, non-fouling marine vessels or biomedical devices, and anti-icing or drag-reducing surfaces. An ideal coating should ensure stable repellency, should be transparent in order not to affect color or transparency of the un...