Alternative foaming agents for fabrication of glass foam

Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents

In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...

Influence of Milled Waste Glass to Clay Ceramic Foam Properties Made by Direct Foaming Route

Guar Foaming Albumin – A Foam Stabilizer

the effect of fe2o3 on microstructure and mechanical properties of foam glass obtained from soda-lime waste glass and sic as foaming agent

in this study, the microstructure and properties of foam glass obtained as a result of the interaction of the waste glass with sic as the foaming agent and fe2o3 as the oxidizing agent have been investigated using scanning electron microscopy (sem), as well as three-point bending and pycnometery tests. first, the temperature and optimized amount of sic for making foam glass was determined. the ...

Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam

In this article, the effects of different foam production times and temperatures on the mechanical, physical, and structural properties of polypropylene (PP) foam has been investigated. The microcellular PP foams were carried out using supercritical carbon dioxide (sc-CO2) as a physical foaming agent in a batch process. The samples were placed in a pressure vessel and were saturated ...