Alumina based low permittivity substrate utilizing superplastically foaming method
نویسندگان
چکیده
منابع مشابه
Broadband Feed for Low Cross-Polarization Uniplanar Tapered Slot Antennas on Low-Permittivity Substrate
A broadband feeding technique for the uniplanar tapered slot antenna (TSA) is presented. The TSA operates at a center frequency of 6.5 GHz with a 7 GHz bandwidth (107 percent). The antenna and feed are realized with a broadband microstrip-to-slotline transition on a low permittivity high frequency substrate, Rogers RT/Duroid 5880. The input impedance of the system is designed for 50 Ω compatibi...
متن کاملPorous Structure Fabrication Using a Stereolithography-Based Sugar Foaming Method
Porous structure has wide application in industry due to some of its unique properties such as low density, low thermal conductivity, high surface area, and efficient stress transmission. Both templating and foaming agent methods have been used to fabricate porous structures. However, these methods can only fabricate simple geometries. In recent years, many studies have been done to use additiv...
متن کاملEffects of Substrate Permittivity on Planar Inverted-F Antenna Performances
This paper quantifies the gain and matching bandwidth variations of a planar inverted-F antenna (PIFA) for several dielectric substrates. The performance of the PIFA is assessed in two configurations. First, the PIFA is studied with different substrates for a radiating patch of fixed dimensions of 4.92 cm x 2.13 cm. The effects of the dielectric constant of the perfect and lossy substrates on t...
متن کاملElectromagnetic scattering of high-permittivity particles on a substrate.
We contribute to the study of the optical properties of high-permittivity nanostructures deposited on surfaces. We present what we believe is a new computational technique derived from the coupled-dipole approximation (CDA), which can accommodate high-permittivity scatterers. The discretized CDA equations are reformulated by use of the sampling theory to overcome different sources of inaccuracy...
متن کاملInvestigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2010
ISSN: 1882-0743,1348-6535
DOI: 10.2109/jcersj2.118.1090