Aluminum alloy components for ultra-high vacuum. (I)

Cast Aluminum Alloy for High Temperature Applications

Originally developed by NASA as high performance piston alloys to meet U.S. automotive legislation requiring low exhaust emission, the novel NASA alloys now offer dramatic increase in tensile strength for many other applications at elevated temperatures from 450°F (232°C) to about 750°F (400°C). It is an ideal low cost material for cast automotive components such as pistons, cylinder heads, cyl...

Rolling Contact Fatigue in Ultra High Vacuum

Texture Measurement in Aluminum Alloy at High Temperature

The casting and hot rolling process is a most important and widely used industrial route to produce aluminum alloy sheet[I]. Because rolling is such a high volume process and the capital expenditure in plants and fabrication facilities is so large, even small cost savings or increases in efficiency can result in a very large total money savings[2, 3]. To remove the very costly and time-consumin...

Extruded Aluminum Vacuum Chambers for Insertion Devices

Extruded aluminum vacuum chambers are commonly used in the storage rings of synchrotron facilities. For 18 years the APS has designed and fabricated vacuum chambers made from extruded aluminum for use with insertion devices at the APS and for use at other facilities including BESSY II, the Swiss Light Source (SLS), the Canadian Light Source (CLS), the TESLA Test Facility (TTF), and the European...

Process capability improvement through DMAIC for aluminum alloy wheel machining

This paper first enlists the generic problems of alloy wheel machining and subsequently details on the process improvement of the identified critical-to-quality machining characteristic of A356 aluminum alloy wheel machining process. The causal factors are traced using the Ishikawa diagram and prioritization of corrective actions is done through process failure modes and effects analysis. Proce...