Aluminum nanocomposites for elevated temperature applications
نویسندگان
چکیده
منابع مشابه
Cast Aluminum Alloy for High Temperature Applications
Originally developed by NASA as high performance piston alloys to meet U.S. automotive legislation requiring low exhaust emission, the novel NASA alloys now offer dramatic increase in tensile strength for many other applications at elevated temperatures from 450°F (232°C) to about 750°F (400°C). It is an ideal low cost material for cast automotive components such as pistons, cylinder heads, cyl...
متن کاملEFFECTS OF ELEVATED TEMPERATURE ON MECHANICAL BEHAVIOR OF AN ALUMINUM METAL MATRIX COMPOSITE
Effects of temperature on properties and behavior of a 20 vol % particulate SiC reinforced 6061 aluminum alloy and 6061 unreinforced Al alloy were investigated. Yield strength and elongation to failure were measured as a function of test temperatures up to 180^oC. In addition, the effects of holding time at 180^ oC on tensile properties and fracture mechanisms of the materials at this temperatu...
متن کاملSynthesis of TiO2-ZnO-ZrO2 Nanocomposites for Nonlinear Optics Applications
A sol-gel technique under ultrasonic irradiation was applied to synthesize ZrO2/TiO2/ZnOnanocomposites. X-ray diffraction analysis confirmed the successful synthesis of nanocomposites. The strain and crystalline size values of ZrO2/TiO2/ZnO nanocomposites are estimated to be 9.98×10-4 and 17.66 nm, respectively. The linear absorption coefficient of ZrO2/TiO2/ZnO nanocomposites was measure...
متن کاملLow Temperature Reactive Sputtering of Thin Aluminum Nitride Films on Metallic Nanocomposites
Piezoelectric aluminum nitride thin films were deposited on aluminum-molybdenum (AlMo) metallic nanocomposites using reactive DC sputtering at room temperature. The effect of sputtering parameters on film properties was assessed. A comparative study between AlN grown on AlMo and pure aluminum showed an equivalent (002) crystallographic texture. The piezoelectric coefficients were measured to be...
متن کاملPolymeric Nanocomposites for Tribological Applications
Polymer nanocomposites operate in applications where fluid and grease lubricants fail, and have superior tribological performance to traditional polymer composites. Nanoparticle fillers have been a part of notable reductions in the wear rate of the polymer matrix at very low loadings. Despite instances of remarkable wear reductions at unprecedented loadings (3 000 times at 0.5% loading in one c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 2011
ISSN: 1047-4838,1543-1851
DOI: 10.1007/s11837-011-0030-5