ALUMINUM USED AS AN ELECTRODE.
نویسندگان
چکیده
منابع مشابه
Static and Dynamic Analyze of the an Aluminum Pad used as Portable Roadway
Due to geographic and climatic conditions in mountainous northwest area, Roads in these areas are often covered with snow, ice and mud. Hence Transportation of equipment and soldiers encounter hardship and difficulties in rural area and specially outposts. To solve these problems, it is needed to fabricate portable roadway or traction mats. These high strength mats cover surface of roads and ar...
متن کاملThe Aluminum Electrode in AlCl 3
Passivation Phenomena have been observed upon cathodic and anodic polarization of the Al electrode in AlC 13-KCl-NaC1 melts between 100 and 160 °C. They are caused by formation of a solid salt layer at the electrode surface resulting from concentration changes upon current flow. The anodic limiting currents increased with temperature and with decreasing AlCl content of the melt. Current voltage...
متن کاملHigh optical transmittance of aluminum ultrathin film with hexagonal nanohole arrays as transparent electrode.
We fabricate samples of aluminum ultrathin films with hexagonal nanohole arrays and characterize the transmission performance. High optical transmittance larger than 60% over a broad wavelength range from 430 nm to 750 nm is attained experimentally. The Fano-type resonance of the excited surface plasmon plaritons and the directly transmitted light attribute to both of the broadband transmission...
متن کاملAn Electrochemical Investigation of Nano Cerium Oxide/Graphene as an Electrode Material for Supercapacitors
In this paper, the effect of cationic and anionic ion sizes on the charge storage capability of graphene nanosheets is investigated. The electrochemical properties of the produced electrode are studied using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques in 3M NaCl, NaOH, and KOH electrolytes. Scanning electron microscopy (SEM) is used to characterize the mi...
متن کاملVertically-aligned carbon nanotubes on aluminum as a light-weight positive electrode for lithium-polysulfide batteries.
A light-weight, high specific surface current collector made of vertically-aligned carbon nanotubes grown on an aluminum substrate was fabricated and studied as a positive electrode in a semi-liquid lithium/polysulfide battery. This simple system delivered stable capacities over 1000 mA h gS(-1) and 2 mA h cm(-2) with almost no capacity loss over 50 cycles.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Chemical Society
سال: 1898
ISSN: 0002-7863,1520-5126
DOI: 10.1021/ja02066a014