Amorphization of NiTi Alloy by Cold Rolling
نویسندگان
چکیده
منابع مشابه
Nanofretting behaviors of NiTi shape memory alloy
Nanofretting behaviors of NiTi shape memory alloy Linmao Qian a, Zhongrong Zhou a,∗, Qingping Sun b, Wenyi Yan c a Tribology Research Institute, National Traction Power Laboratory, Southwest Jiaotong University, Chengdu 610031, China b Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Hong Kong, China c School of Engineering and Information Technology, De...
متن کاملBiocompatibility of NiTi Alloy Implants in vivo
In this study, the powders of Ni and Ti with 50.5 at.% Ni for 12 h were blended and cold pressed at the different pressures (50, 75 and100 MPa).The porous product obtained after Ni-Ti compacts were synthesized by SHS (self-propagating hightemperature synthesis) in the different preheating temperatures (200, 250 and 300oC) and heating rates (30, 60 and 90oC/min). The effects of the pressure, pre...
متن کاملFree-standing NiTi alloy nanowires fabricated by nanoskiving.
We report on free-standing NiTi alloy nanowires (120 nm × 75 nm) fabricated using a technique referred to as "nanoskiving", which complements conventional thin film sputter deposition with ultramicrotomy for thin sectioning. To date, the technique has been limited to pure metals without exploring metallic alloys. Leveraging the technique for the fabrication of shape memory alloy (SMA) nanostruc...
متن کاملEffect of TiO2 nanoparticles on the bond strength of CP Ti sheet by cold Rolling method
In this work, the strength of cold roll bond of the commercially pure titanium (CP Ti) sheet and the effect of TiO2 nanoparticles on bond strength was investigated. Through the accumulative roll bonding process, which is considered among the important severe plastic deformation processes, the creation of suitable bonds plays a significance role in the ultimate strength of the bond. Thus, resear...
متن کاملEffects of Cold-Rolling/Aging Treatments on the Shape Memory Properties of Ti49.3Ni50.7 Shape Memory Alloy
In this study, the combined effects of strengthening, precipitates, and textures on the shape recovery ability and superelasticity of thermomechanically treated Ti49.3Ni50.7 shape memory alloy (SMA) in both the rolling and transverse directions were studied by experimental measurements and theoretical calculations. Experimental results and theoretical calculations showed that the 300 °C × 100 h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 1998
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.37.373