Amorphous mesostructured zirconia with high (hydro)thermal stability
نویسندگان
چکیده
منابع مشابه
Surface roughened zirconia: towards hydrothermal stability.
Surface roughness is needed in several yttria-stabilized zirconia components used in restorative dentistry for osseointegration or adhesion purposes. This can be achieved by different treatments, which may also modify the microstructure of the surface. Among them, sandblasting and chemical etching are widely used, but their effect on hydrothermal aging of zirconia is not fully understood. In th...
متن کاملEffect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms
This work is focused on the effect of amorphous SiO2 addition on the phase transformation and microstructural evolution of ZrO2 particles. Considering the structural similarities between the amorphous ZrO2 and its tetragonal structure, XRD results showed initial nucleation of metastable tetragonal ZrO2 from its amorphous matrix upon heat treatment. This metastable phase is unstable in pure ZrO2...
متن کاملOne-step hydrothermal synthesis of ordered mesostructured carbonaceous monoliths with hierarchical porosities.
Hierarchical carbonaceous monoliths with ordered 2-D hexagonal mesostructures have been successfully synthesized by using phenolic resols as precursors and mixed triblock copolymers as templates via a one-step hydrothermal approach.
متن کاملHigh temperature stability in lanthanum and zirconia-based gate dielectrics
Gate dielectrics composed primarily of lanthana and zirconia were prepared by reactive evaporation. The stability of the layers during high temperature anneals was investigated. By controlling the oxygen partial pressure during heat treatment, lanthana and zirconia films could be protected against reaction with the underlying Si substrate and against the growth of low-« interface layers. The el...
متن کاملHydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology
A hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (RSM). The synthesized zirconia samples were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM) analyses to identify mean nano...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2020
ISSN: 2046-2069
DOI: 10.1039/d0ra04824k