An Active Annular Ring Frequency Selective Surface

Equivalent Circuit Model for Square Ring Slot Frequency Selective Surface

An equivalent circuit model for predicting the frequency response of a square ring slot frequency selective surface (SRS-FSS) for normal incidence is described. The proposed FSS consists of an array of square patches centered within a wire grid. The presented circuit model is formed by the impedance of the wire grid that is parallel with the impedance of the patch array, also the mutual couplin...

Single - Layer Bandpass Active Frequency Selective Surface

If you believe this document infringes copyright then please contact the KAR admin team with the take-down information provided at http://kar.kent.ac.uk/contact.html Citation for published version Ghaffer, I Kiani. and Ford, Kenneth L. and Esselle, Karu P. and Weily, Andrew R. and Panagamuwa, C. and Batchelor, John C. (2008) Single-Layer Bandpass Active Frequency Selective Surface. Microwave an...

Single-Layer Bandpass Active Frequency Selective Surface

A single-layer, bandpass, active FSS is presented. It shows good angle of incidence stability for TE incidence, at the operating frequency of 2.45 GHz. It is based on circular loop aperture with each unit cell having four PIN diodes. A novel method for dc biasing is used. About 12 dB average variation in transmission loss, between ON and OFF states, has been experimentally achieved at 2.45 GHz.

Switchable Split-ring Frequency Selective Surfaces

Abstract—Tunable frequency selective surfaces (FSSs) based on split ring resonators (SRRs) are presented. Tuning performance is achieved by means of several on/off switches placed between the rings of each SRR element. The band-stop FSS response is dynamically tuned to different frequency bands at different switching states. In addition, loadings placed at the corners of outer ring elements, fo...

A Compressible Reconfigurable Frequency Selective Surface