An Advanced High‐Entropy Fluorophosphate Cathode for Sodium‐Ion Batteries with Increased Working Voltage and Energy Density (Adv. Mater. 14/2022)
نویسندگان
چکیده
Sodium-Ion Batteries Cathode materials are decisive for the development of sodium-ion batteries (SIBs). In article number 2110108, Xing-Long Wu and co-workers present a high-entropy Na3V2(PO4)2F3-based cathode advanced SIBs. The effect endows this material with lowered Na+ migration barrier enhanced electronic conductivity, which jointly promote charge transport sodium-storage ability in phosphate cathode, thereby enhancing average operating voltage energy density SIB.
منابع مشابه
A new O3-type layered oxide cathode with high energy/power density for rechargeable Na batteries.
A new O3-Na(0.78)Li(0.18)Ni(0.25)Mn(0.583)O(w) is prepared as the cathode material for Na-ion batteries, delivering exceptionally high energy density and superior rate performance. The single-slope voltage profile and ex situ synchrotron X-ray diffraction data demonstrate that no phase transformation happens through a wide range of sodium concentrations (up to 0.8 Na removed). Ni(2+)/Ni(4+) is ...
متن کاملTailoring a fluorophosphate as a novel 4 V cathode for lithium-ion batteries
Lithium-ion batteries, which have been widely used to power portable electronic devices, are on the verge of being applied to new automobile applications. To expand this emerging market, however, an electrode that combines fast charging capability, long-term cycle stability, and high energy density is needed. Herein, we report a novel layered lithium vanadium fluorophosphate, Li(1.1)Na(0.4)VPO(...
متن کاملAn advanced cathode for Na-ion batteries with high rate and excellent structural stability.
Layered P2-Na(x)[Ni(1/3)Mn(2/3)]O(2) (0 < x < 2/3) is investigated as a cathode material for Na-ion batteries. A combination of first principles computation, electrochemical and synchrotron characterizations is conducted to elucidate the working mechanism for the improved electrochemical properties. The reversible phase transformation from P2 to O2 is observed. New configurations of Na-ions and...
متن کاملPhospho-Olivine as Advanced Cathode Material for Lithium Batteries
Nano-sized and micron-sized LiFePO4 electrode materials were prepared by a sol gel and coprecipitation reactions. An improvement of the cycling and rate performances in lithium cells was observed for the carbon coated LiFePO4 materials. The coating process uses a solid/gas-phase reaction which consists of decomposing propylene gas, as carbon source, inside a reactor containing olivine LiFePO4 m...
متن کاملElectrospun FeS2@Carbon Fiber Electrode as a High Energy Density Cathode for Rechargeable Lithium Batteries.
In this study, an FeS2@carbon fiber electrode is developed with FeS2 nanoparticles either embedded in or attached to carbon fibers by using an electrospinning method. By applying this binder-free, metal-current-collector-free FeS2@carbon fiber electrode, both the redox reaction and capacity decay mechanisms for the Li-FeS2 system are revealed by changing the electrolyte (conventional carbonate ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials
سال: 2022
ISSN: ['1521-4095', '0935-9648']
DOI: https://doi.org/10.1002/adma.202270110