An Analysis of Fatigue Crack Propagation Characteristics Based on Crack Opening-Closure Phenomena (1st report)
نویسندگان
چکیده
منابع مشابه
Fatigue crack closure: a review of the physical phenomena
Plasticity-induced, roughness-induced and oxide-induced crack closures are reviewed. Special attention is devoted to the physical origin, the consequences for the experimental determination and the prediction of the effective crack driving force for fatigue crack propagation. Plasticity-induced crack closure under plane stress and plane strain conditions require, in principle, a different expla...
متن کاملMechanical Characteristics on Fatigue Crack Propagation in Aluminium Plate
This paper present a mechanical characteristics on fatigue crack propagation in Aluminium Plate based on strain and stress distribution using the abaqus software. The changes in shear strain and stress distribution during the fatigue cycle with crack growth is identified. In progressive crack in the strain distribution and the stress is increase in the critical zone. Numerical Modal analysis of...
متن کاملOn Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملData-driven Fatigue Crack Evaluation based on Wave Propagation Data
8 This project presents a machine learning based fatigue crack sensor 9 evaluation scheme without using a physical model. A supervised binary 10 classification problem is defined to distinguish damaged steel specimens 11 from intact specimens. Sets of time-series wave propagation data collected 12 by the fatigue crack sensor are utilized for the proposed scheme. In order to 13 apply supervised ...
متن کاملStochastic modeling of fatigue crack propagation
This paper presents a stochastic model of fatigue-induced crack propagation in metallic materials. The crack growth rate predicted by the model is guaranteed to be non-negative. The model structure is built upon the underlying principle of Karhunen±Lo eve expansion and does not require solutions of stochastic dierential equations in either Wiener integral or Itô integral setting. As such this ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Naval Architects of Japan
سال: 1983
ISSN: 1884-2070,0514-8499
DOI: 10.2534/jjasnaoe1968.1983.344